Haryana SDO / JE - Water Resources Engineering Subject Test 15

What is in this paper

10 questions from 1 subject. 4 medium, 6 hard.

SubjectQuestionsMarks
Water Resources Engineering 10 10
Total1010

Students who took this test

Nobody has taken it yet. Be the first on the leaderboard.

Sample questions from this paper

Options, answers and explanations open when you take the test.

  1. Q1 Water Resources Engineering Pressure

    Find gauge pressure 5 m below a fresh water surface. Use unit weight 9.81 kN/m³. / मीठे पानी की सतह से 5 m नीचे गेज दाब ज्ञात करें। इकाई भार 9.81 kN/m³ लें।

  2. Q2 Water Resources Engineering Hydrostatic Force

    A vertical rectangular gate of width 2 m extends from the water surface to depth 5 m. Find the horizontal force with γ = 9.81 kN/m³. / 2 m चौड़ा ऊर्ध्वाधर गेट सतह से 5 m गहराई तक है। γ = 9.81 kN/m³ पर क्षैतिज बल निकालें।

  3. Q3 Water Resources Engineering Pipe Continuity

    In steady incompressible flow a pipe goes from 300 mm diameter to 150 mm. The upstream speed is 2.1 m/s. Find the smaller-section speed. / स्थिर असंपीड्य प्रवाह में पाइप 300 mm से 150 mm व्यास का हो जाता है। पहले वेग 2.1 m/s है। छोटे खंड का वेग ज्ञात करें।

  4. Q4 Water Resources Engineering Bernoulli Equation

    An ideal jet issues from a tank whose water surface lies 12.5 m above a small opening. Both surfaces are at atmospheric pressure. Find the exit speed with g = 9.81 m/s². / टैंक में जल सतह छोटे छिद्र से 12.5 m ऊपर है। दोनों स्थान वायुमंडलीय दाब पर हैं। g = 9.81 m/s² लेकर आदर्श निकास वेग निकालें।

  5. Q5 Water Resources Engineering Pipe Friction

    A 200 mm pipe of length 105 m carries flow at 2 m/s. Find head loss with Darcy friction factor 0.02 and g = 9.81 m/s². / 200 mm पाइप की लंबाई 105 m है और प्रवाह वेग 2 m/s है। डार्सी घर्षण गुणांक 0.02 और g = 9.81 m/s² से शीर्ष हानि निकालें।

More Haryana Sub Divisional Engineer (SDE/SDO) & Junior Engineer (JE) tests

All mock tests