Haryana SDO / JE - Structural Engineering Subject Test 05

What is in this paper

10 questions from 1 subject. 7 medium, 3 hard.

SubjectQuestionsMarks
Structural Engineering 10 10
Total1010

Students who took this test

Nobody has taken it yet. Be the first on the leaderboard.

Sample questions from this paper

Options, answers and explanations open when you take the test.

  1. Q1 Structural Engineering Influence Lines

    A single 60 kN moving load lies 3 m to the right of the left support on a 10 m span. Find the right reaction. / 10 m स्पैन में 60 kN का चल भार बाएँ आलंब से 3 m दाईं ओर है। दाईं प्रतिक्रिया ज्ञात करें।

  2. Q2 Structural Engineering Concrete Mix

    A concrete mix uses 335 kg cement per cubic metre with water–cement ratio 0.45 by mass. Find net mixing-water mass. / मिश्रण में प्रति घन मीटर 335 kg सीमेंट और द्रव्यमान से जल–सीमेंट अनुपात 0.45 है। शुद्ध मिश्रण जल का द्रव्यमान निकालें।

  3. Q3 Structural Engineering RCC Bond

    A 16 mm reinforcing bar carries 225 MPa stress with design bond stress 1.6 MPa. Find development length. / 16 mm सरिये में 225 MPa प्रतिबल और डिजाइन बंधन प्रतिबल 1.6 MPa है। विकास लंबाई ज्ञात करें।

  4. Q4 Structural Engineering Prestressing

    A concentric effective prestressing force of 190 kN acts on an 80000 mm² concrete section. Find the uniform compression. / 80000 mm² कंक्रीट खंड पर 190 kN का केंद्रित प्रभावी पूर्वप्रतिबल बल लगता है। समान संपीडन प्रतिबल निकालें।

  5. Q5 Structural Engineering Steel Tension

    A flat steel plate is 110 mm wide and 10 mm thick. Its critical straight section crosses two 18 mm holes. Find its net area. / इस्पात प्लेट 110 mm चौड़ी और 10 mm मोटी है। क्रांतिक सीधे खंड में 18 mm के दो छेद हैं। शुद्ध क्षेत्रफल ज्ञात करें।

More Haryana Sub Divisional Engineer (SDE/SDO) & Junior Engineer (JE) tests

All mock tests